Products
Aluminum Foil Tape Mylar Tape
Product Introduction
Aluminum foil tape Mylar tape is a metal composite tape material, which is made of single-sided or double-sided aluminum foil as the base material, polyester film as the reinforcing material, bonded with polyurethane glue, cured at high temperature, and then slit. Aluminum foil Mylar tape can provide high shielding coverage and is suitable for the wire pair shielding layer of control cables, and the outer conductor of coaxial cables.
Aluminum foil tape Mylar tape can make the signal transmitted in the cable better free from electromagnetic interference and reduce the signal attenuation during the data transmission process, so that the signal can be transmitted safely and effectively improve the electrical performance of the cable.
We can provide single-sided/ double-sided aluminum foil Mylar tape. The double-sided aluminum foil Mylar tape is composed of a layer of polyester film in the middle and a layer of aluminum foil on both side. The double-layer aluminum reflects and absorbs the signal twice, which has a better shielding effect.
The aluminum foil Mylar tape we provided has the characteristics of high tensile strength, good shielding performance, and high dielectric strength, etc.
The color of the double-sided aluminum foil Mylar tape is natural, the single-sided can be natural, blue or other colors required by customers.
Application
Mainly used in control cables, signal cables, data cables and other various electronic cables, which plays the role of pair shielding layer, the overall shielding layer outside the core and outer conductor of coaxial cable, etc.
Technical Parameters
Single-sided Aluminum Foil tape, Mylar Tape
| Nominal Thickness (μm) | Composite Structure | Nominal Thickness of Aluminum Foil(μm) | Nominal Thickness of PET film(μm) |
| 24 |
AL+Mylar |
9 | 12 |
| 27 | 9 | 15 | |
| 27 | 12 | 12 | |
| 30 | 12 | 15 | |
| 35 | 9 | 23 | |
| 38 | 12 | 23 | |
| 40 | 25 | 12 | |
| 48 | 9 | 36 | |
| 51 | 25 | 23 | |
| 63 | 40 | 20 | |
| 68 | 40 | 25 | |
| Note: More specifications, please contact our sales staff. | |||
Double-sided Aluminum Foil tape, Mylar Tape
| Nominal Thickness (μm) |
Composite Structure | Nominal Thickness of A side Aluminum Foil (μm) |
Nominal Thickness of PET film (μm) |
Nominal Thickness of B side Aluminum Foil (μm) |
| 35 |
AL+Mylar+AL |
9 | 12 | 9 |
| 38 | 9 | 15 | 9 | |
| 42 | 9 | 19 | 9 | |
| 46 | 9 | 23 | 9 | |
| 57 | 20 | 12 | 20 | |
| 67 | 25 | 12 | 25 | |
| Note: More specifications, please contact our sales staff. | ||||
| Nominal Thickness (μm) |
Composite Structure | Nominal Thickness of A side Aluminum Foil (μm) |
Nominal Thickness of PET film (μm) |
Nominal Thickness of B side Aluminum Foil (μm) |
| 35 |
AL+Mylar+AL |
9 | 12 | 9 |
| 38 | 9 | 15 | 9 | |
| 42 | 9 | 19 | 9 | |
| 46 | 9 | 23 | 9 | |
| 57 | 20 | 12 | 20 | |
| 67 | 25 | 12 | 25 | |
| Note: More specifications, please contact our sales staff. | ||||
Technical Parameters
| Item | Technical Parameters | |
| Tensile Strength(MPa) | ≥45 | |
| Breaking Elongation(%) | ≥5 | |
| Peel Strength(N/cm) | ≥2.6 | |
|
Dielectric Strength |
Single-sided | 0.5kV d.c, 1min, No breakdown
|
| aluminum foil mylar tape | ||
| Double-sided | 1.0kV d.c, 1min, No breakdown | |
| aluminum foil mylar tape | ||
Packaging
1) Aluminum foil tape Mylar tape in spool is wrapped with wrapping film, and the two ends are supported by plywood splints, fixed by the packing tape, and then placed on the pallet.
2) Aluminum foil Mylar tape in pad is packed in plastic bag and put into cartons, then palletized, and wrapped with wrapping film.
Pallet and wooden box size: 114cm*114cm*105cm
Storage
1) The product shall be kept in a clean, dry and ventilated warehouse. The warehouse should be ventilated and cool, avoid direct sunlight, high temperature, heavy humidity, etc., to prevent products from swelling, oxidation and other problems.
2) The product should not be stacked together with flammable products and should not be close to fire sources.
3) The product should be packed completely to avoid moisture and pollution.
4) The product shall be protected from heavy pressure and other mechanical damage during storage.
5) The product cannot be stored in the open air, but a tarp must be used when it must be stored in the open air for a short time.
Certification
FREE SAMPLE TERMS
ONE WORLD Is Committed To Providing Customers With Industleading High-Quality Wire And Cable Matenals And First-Classtechnical Services
You Can Request A Free Sample Of The Product You Are Interested Inwhich Means You Are Willing
To Use Our Product For Production
We Only Use The Experimental Data You Are Willing To
Feedback Andshare As The Verification Of Product Characteristics And Quality , Andthen Help
Us To Establish A More Complete Quality Control System Toimprove Customers’ Trust And
Purchase Intention , So Please Restassured
You Can Fill Out The Form On The Right To
Request A Free Sample
Application Instructions
1 . The Customer Has An International Express Delivery Account
Orvoluntarily Pays The Freight ( The Freight Can Be Returned In The Order )
2 . The Same
Institution Can Only Apply For One Free Sample Of Thesame Product , And The Same Institution
Can Apply For Up To Fivesamples Of Different Products For Free Within One Year
3 . The
Sample Is Only For Wire And Cable Factory Customers , And Onlyfor Laboratory Personnel For
Production Testing Or Research
SAMPLE PACKAGING
FREE SAMPLE REQUEST FORM
Please Enter The Required Sample Specifications , Or Briefly Describe Theproject Requirements , We Will Recommend Samples For You
After submitting the form , the information you fill in may be transmitted to the ONE WORLD background for further processed to determine product specification and address information with you. And may also contact you by telephone. Please read our Privacy Policy For more details.